Stainless Headers Mfg, Inc. » ICEngineWorks

ICEngineWorks
Design and modeling The most important step in the system, STAGE I allows builders to use our patented plastic blocks to quickly generate the tubular shapes and geometry required to test fitment, ease of fabrication, and even set budgets for any project. Arrows and index marks on each block help determine the number of sections each primary tube will require. The only requirements are that the engine is fitted in place with flanges and starter tubes, and that the exhaust collectors, or Collector Dummies are firmly secured in their final position in the engine bay. Sold in sets per SERIES (tubing OD specific).

Browse SHM Gear Products

Sort
View
 
Items 1-30 of 30
ICEngineWorks
Description: EXCLUSIVE Modeling Kit to match our SHM Mandrel Bends Product Line
Item #: ICW-1875EHBASIC-SHM
Condition: New
Price: $499.95
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 1 3/4" BASIC Set, 154 Pieces
Item #: ICW-1750EHBASIC
Condition: New
Price: $449.99
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 1 3/4" OD Exhaust Header Fabrication System
Item #: ICW-1750EHSYSTEM
Condition: New
Price: $1,599.99
Qty:

ICEngineWorks
Description: 1-3/4" OD Pro Exhaust Header Modeling Set, 308 Pieces
Item #: ICW-1750EHPRO1
Condition: New
Price: $799.99
Qty:

ICEngineWorks
Description: 1-5/8" OD Basic Exhaust Header Modeling Set, 124 Pieces
Item #: ICW-1625EHBASIC
Condition: New
Price: $399.95
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 1 5/8" OD Exhaust Header Fabrication System
Item #: ICW-1625EHSYSTEM
Condition: New
Price: $1,399.99
Qty:

ICEngineWorks
Description: 1-5/8" OD Pro Exhaust Header Modeling Set, 248 Pieces
Item #: ICW-1625EHPRO1
Condition: New
Price: $699.95
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 1 7/8" BASIC Set, 184 Pieces
Item #: ICW-1875EHBASIC
Condition: New
Price: $549.99
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 1 7/8" OD Exhaust Header Fabrication System
Item #: ICW-1875EHSYSTEM
Condition: New
Price: $1,849.99
Qty:

ICEngineWorks
Description: 1 7/8" OD Pro Exhaust Header Modeling Set, 368 Pieces
Item #: ICW-1875EHPRO1
Condition: New
Price: $999.99
Qty:

ICEngineWorks
Description: 2" OD Basic Exhaust Header Modeling Set, 124 Pieces
Item #: ICW-2000EHBASIC
Condition: New
Price: $449.99
Qty:

ICEngineWorks
Description: ICEngine Works Exhaust Header Modeling Set: 2" OD Exhaust Header Fabrication System
Item #: ICW-2000EHSYSTEM
Condition: New
Price: $1,549.99
Qty:

ICEngineWorks
Description: 2" OD Pro Exhaust Header Modeling Set, 248 Pieces
Item #: ICW-2000EHPRO1
Condition: New
Price: $799.99
Qty:

ICEngineWorks
Description: 2-1/2" OD Basic Full Exhaust Modeling Set, 136-pcs
Item #: ICW-2500FEBASIC
Condition: New
Price: $649.99
Qty:

ICEngineWorks
Description: 2-1/2" OD Pro Full Exhaust Modeling Set, 208-pcs
Item #: ICW-2500FEPRO
Condition: New
Price: $899.99
Qty:

ICEngineWorks
Description: 3" OD Basic Full Exhaust Modeling Set, 136-pcs
Item #: ICW-3000FEBASIC
Condition: New
Price: $649.99
Qty:

ICEngineWorks
Description: 3" OD Pro Full Exhaust Modeling Set, 208-pcs
Item #: ICW-3000FEPRO
Condition: New
Price: $899.99
Qty:

ICEngineWorks
Description: ICEngineworks 1-3/4" OD 4-to-1 Collector Dummy
Item #: ICW-1750EHCD41
Condition: New
Price: $99.00
Qty:

ICEngineWorks
Description: ICEngineworks 1 3/4" OD Tack Welding Clamps- Set of 4
Item #: ICW-1750EHTTWCS
Condition: New
Price: $130.00
Qty:

ICEngineWorks
Description: ICEngineworks 1 5/8" OD Tack Welding Clamps- Set of 4
Item #: ICW-1625EHTTWCS
Condition: New
Price: $130.00
Qty:

ICEngineWorks
Description: ICEngineworks 1 7/8" OD 4-to-1 Collector Dummy
Item #: ICW-1875EHCD41
Condition: New
Price: $99.00
Qty:

ICEngineWorks
Description: ICEngineworks 1 7/8" OD Tack Welding Clamps- Set of 4
Item #: ICW-1875EHTTWCS
Condition: New
Price: $130.00
Qty:

ICEngineWorks
Description: ICEngineworks 1-5/8" OD 4-to-1 Collector Dummy
Item #: ICW-1625EHCD41
Condition: New
Price: $99.00
Qty:

ICEngineWorks
Description: ICEngineworks 2 1/2" OD Tack Welding Clamps- Set of 4
Item #: ICW-2500EHTTWCS
Condition: New
Price: $180.00
Qty:

ICEngineWorks
Description: ICEngineworks 2" OD 4-to-1 Collector Dummy
Item #: ICW-2000EHCD41
Condition: New
Price: $99.00
Qty:

ICEngineWorks
Description: ICEngineworks 2" OD Tack Welding Clamps- Set of 4
Item #: ICW-2000EHTTWCS
Condition: New
Price: $130.00
Qty:

ICEngineWorks
Description: ICEngineWorks 2-1/2" OD Full Exhaust Fabrication System
Item #: ICW-2500FESYSTEM
Condition: New
Price: $1,899.99
Qty:

ICEngineWorks
Description: ICEngineWorks 3" OD Full Exhaust Fabrication System
Item #: ICW-3000FESYSTEM
Condition: New
Price: $1,949.99
Qty:

ICEngineWorks
Description: ICEngineworks 3" OD Tack Welding Clamps- Set of 4
Item #: ICW-3000EHTTWCS
Condition: New
Price: $180.00
Qty:

ICEngineWorks
Description: EXCLUSIVE SHM-ICEngine Works 1 5/8" Header Modeling PRO Set. With all modeling parts specifically made for our SHM bend product line.
Item #: ICW-1625EHPRO1-SHM
Condition: New
Price: $699.95
Qty:

Items 1-30 of 30

More About ICEngineWorks

The icengineworks® (Internal Combustion Engine works) product line was developed by engineer, designer, and motorhead Victor Franco. Victor's passion and strong inventive abilities helped him to develop solutions to problems he was encountering in his own automotive shop. "We were building headers just like everyone else, or at least attempting to do so if the piles of scrap tubing were any indication." states Franco. "We knew in our minds what we wanted to build, but struggled to produce our designs easily and economically." The EH or Exhaust Header Series was the first to be launched which later led to the development of the NP Series for turbo manifolds and the FE Series for full exhaust. The mission of icengineworks is to help our customers design and fabricate complex tubular assemblies quickly, efficiently and in a fun and predictable way. These systems can be utilized but anyone with basic metalworking and welding skills with minimal tools required. Mocking up either a simple or complicated exhaust header in the confines in which it must live and work was always a chore. A chore often not approached with great enthusiasm. Times have changed. Now, all the mistakes can be made quick and easy, then get on with the job. It is so easy now that one quickly loses the tendency to shrug and say “that’s good enough.” Recall, if you will, the fellows that built the original magnificent “bundle of snakes” exhaust systems on the Le Mans winning Ford GT’s of the mid-1960’s. Those guys were blessed with an enormous level of skill and artistry. If those extraordinary fabricators were to look at Franco’s header modeling system today, they surely would ask: “Where was this guy when we needed him?"